Properly Use the VonWater CT910 Series Countertop RO System

Properly Use the VonWater CT910 Series Countertop RO System

The VonWater CT910 Series Countertop Reverse Osmosis (RO) System delivers clean, fresh, and crisp water for you and your family. To ensure the best experience with your CT910 system, here are some important tips on how to use it daily:

1. Inspect the Package Upon Arrival

When you receive your VonWater CT910 RO system, it's important to first check the condition of the package. If you notice any damage, please contact our support team immediately at support@vonwater.com. Our team is always ready to assist you with any concerns regarding your order.

2. Ensure Proper Installation of the Filter Cartridge

Before using the CT910 RO system, make sure that the filter cartridge is properly installed and securely in place. If the cartridge is not seated correctly or appears to be loose, please press it to make sure it installed securely, you can hear the "beep" sounds when you press it down.

3. Regularly Change the Feed Water Tank

The CT910 system is equipped with a feed tank that requires periodic replenishment of tap water. After filling the tank, it is important to properly lift the tank and put it back to ensure even distribution of water and efficient operation of the system. This simple step will help maintain the performance of your reverse osmosis system for optimal water quality.

4. Maintain Your System for Best Results

To ensure your VonWater CT910 continues to deliver clean and crisp water, it's important to follow regular maintenance practices:

  • Replace the filter cartridges as recommended in the user manual.
  • Keep the system clean by wiping down the surfaces to prevent buildup.
  • Regularly check for leaks and other potential issues.

5. Troubleshooting Tips

If you encounter any problems with your CT910 RO system, here are some common troubleshooting steps:

  • Ensure the filter cartridge is not clogged or overdue for replacement.
  • Check that the feed water tank is properly positioned and full.
  • If water flow seems slower than usual, the filter may need replacement.

For any issues not covered here, please reach out to our customer support team for further assistance.


By following these simple tips, you can enjoy fresh, filtered water from your VonWater CT910 RO system every day. If you have any further questions, don’t hesitate to contact us at support@vonwater.com.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.